Are you having problems when printing on polypropylene (PP)? Not with DIGITRAN heat transfer images. Our digitally printed transfers can be applied even on untreated PP!
Polypropylene (PP) is a material used in many applications from cosmetics to promotional products due to its properties such as hardness, resistance and costs. However, what are important and desired properties for some are an issue for others. That's because PP is not so easy to print on. Here you can find out why this is so and what is needed to print products made of PP, without any pre-treatment.
Polypropylene (PP) is a plastic that belongs to the group of polyolefins. In addition to polypropylene, polyethylene (PE) and PTFE (also known as Teflon) are representatives of this group. These plastics are known from plastic bottles, cream tubes, mascaras or as the coating on a frying pan. Despite these different applications, these plastics and their variations have one thing in common, a very low surface tension. And this is where the difficulty begins.
Put simply, surface tension indicates how well a surface can be wetted by something. Water, with a value of approx. 72 mN/m or dyn/cm, has a very high surface tension. Polypropylene (PP), on the other hand, has a dyn value of approx. 30 and thus a very low surface tension. The front-runner, however, is PTFE with approx. 18 dyn/cm, which is also the reason why nothing really sticks in a frying pan. The crux is that the to be printed material should have a surface tension that is about 10 dyn/cm higher than the surface tension of the ink, varnish or adhesive applied.
This results in the challenge you face when printing polypropylene (PP). More specific, it lies in the fact that the surface tension makes proper wetting difficult or impossible. Nevertheless, we see printed products made of PP, so the problem has been solved, right?
Pretreating Polypropylene (PP)
One way to solving the surface tension problem is to pretreat the plastic. This means that the surface of the PP is changed prior to printing to achieve a better wetting behavior. A number of methods are available to achieve this. These processes include technologies that oxidize the product's surface and form polar groups there. The three common technologies are a flame, corona or plasma pretreatment.
In these processes, the product is either moved pass an open flame, "irradiated" with a generated plasma or by a high-energy corona discharge.
As an alternative to these process solutions, there are other options in the form of primers. These systems are liquids with very low surface tension or aggressive chemicals. In particular, the solvents isopropanol, also known as IPA, ethanol and n-heptane are used because of their low surface tension and short flash-off times to apply a thin coating film with higher surface tension. In this way, the surface of the PP is replaced by a very thin varnish of another material, which allows better adhesion.
Both ways lead to better adhesion, but this optimization is not free.
Additional costs that can be saved
All types of pretreatment have one thing in common, they are an extra step in the process and cause additional costs. In the case of a pretreatment with flame, corona or plasma, the equipment alone can quickly cost several tens of thousands of euros. In addition, electricity, gas and compressed air are constantly consumed. Furthermore, in case an external or offline solution is used, the time required for handling must be taken into account as well.
When using primers on PP, the situation is not much better. Although no expensive equipment is required for priming, the primers themselves are an expensive product. Likewise, the common application method of soaking a rag and rubbing the surface with it is labor intensive. In addition, the chemicals used are not safe, which is why the worker should wear appropriate protective equipment. Last, the primer must flash off or dry, producing solvent vapors.
Regardless of which way one goes, it is not a good solution but a compelling evil. However, this evil does not have to be.
Printing polypropylene, without pretreatment
The good news is, there are solutions for printing on polypropylene (PP) that work without any pretreatment at all. Furthermore, these can be without VOCs, UV-curing or expensive equipment. This solution is the heat transfer process. More specifically, digitally printed heat transfers from DIGITRAN.
One of the DIGITRAN products are digital heat transfers for untreated PP. These are characterized by the fact that they can be applied to polypropylene without any pretreatment. All that is needed are the transfers and a heat transfer machine.
During the decoration process, a hot transfer roller presses the transfer onto the product. The heat activates the image and makes it bond with the product. After that, the carrier material will be peeled off and the printing process is complete. Neither flash-off, drying nor curing is necessary. In addition, the prints are odorless and can be used without any protective equipment or other special requirements.
This means that cosmetics, promotional and industrial products can be printed quick and easy - even if they are made of PP. At the same time, the digital printing technology offers a resolution of 1200 dpi as well as the production for small and large print runs.
Click this button to get in touch with us for a personal consultation. To make sure that your products can benefit from this unique, clean and digital printing technology as soon as possible.
Further Posts
What is DTF? We explain it!
Welcome to the fascinating world of DTF printing, where flexibility and quality come together. Dive into our detailed insight into the process – from the innovative DTF printers to the automatic powder shakers to the transfer press. Discover how this technology is redefining the boundaries of printing.
Revolutionizing product decoration: digital transfer printing versus screen printing.When it comes to printing on products, choosing the right printing technology is crucial to achieving an impressive and vibrant result. While screen printing has long been a conventional choice, digital transfer printing stands out as a revolutionary alternative, offering unrivaled quality and versatility.
Thinking about buying a DTF printer? The world of Direct to Film (DTF) printing offers a versatile and profitable method for transferring high-quality, full-color designs onto various textiles such as apparel, bags and more. In this comprehensive guide, we will ask important questions and provide valuable insights to help you make an informed decision about purchasing a DTF printer.
The solution for custom designs on t-shirts, hoodies, bags, sportswear and workwear: DTF Digital Transfers.
Thanks to the combination of digital printing and heat transfer technology, textile transfers can be printed in small quantities, full-color and in the shortest possible time. Thus, the outstanding opacity and feel known from plastisol and screen printed transfers is now also available in small quantities.
Besides many other factors that can influence the heat transfer process, the three most important ones are heat, time, and pressure. No matter if it is a textile transfer or a transfer for packaging applications, you should know about the effect of these parameters and how a transfer is affected by them.